Tiny Ring Tray Tutorial


I decided to make a ring tray to keep my new engagement ring safe when I’m doing dishes etc. It’s an easy and quick little sew.

You will need:
2 x 5 inch squares of fabric
Heavy interfacing

I first made a template so I can make it again but you can skip this if you want and put the measurements directly on to the fabric



Cut a 5 inch square from card then cut a 1 and a quarter inch square from each corner.


Mark the template on two pieces of fabric and cut out. Iron on interfacing to one of the pieces.


Sew up the corners on both pieces of fabric.  I trimmed the excess here.


Put the lining inside the outer, right sides together, and pin in place.
Sew around the top with a quarter inch seam leaving a gap on one side to turn it inside out.

Turn out and top stitch to close the gap in the seam and tada!


A lovely tiny ring tray.

This tutorial is handy if you were thinking about making fabric storage bins and wanted a little practice on a smaller scale. Just change the dimensions around to get different shapes.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s